CONCRETE HYDRO

Consolidating and Water-Repellent Protector for Concrete

FILA CONCRETE HYDRO is a water-based protector developed to protect concrete, plaster, brick and tuff surfaces against damage caused by weathering, such as blackening, damp, moss and lichen. By consolidating the surface, it prevents deterioration, dusting and chalking, making the material more cohesive, resistant and durable.

It prevents water absorption while preserving the breathability of the surface, and stops the formation of efflorescence such as carbonates, sulphates and saltpetre. It limits the growth of algae, mould and lichen and helps to prevent blackening caused by air pollution and smoke. It does not form a film, does not alter the appearance of the material and, being UV-resistant, does not yellow over time. It is ideal for floors, coverings and decorative elements indoors and outdoors; treated concrete and plaster surfaces can be painted.

Texture Request WhatsApp: CONCRETE HYDRO

Product Character

Key Features

Protects against dusting without preventing the surface from breathing.
Does not form a film; does not alter the surface appearance of the material.
UV-resistant; does not yellow over time.
Treated concrete and plaster surfaces can be painted.
Water-based and ready to use.
Classified A+ under the French VOC regulation; certified under EMICODE EC1 Plus and LEED (ACP).

Suitable Surfaces

Areas of Use

Concrete surfaces
Plaster
Brick
Tuff
Floors, coverings and decorative elements in cement and artificial stone, indoors and outdoors

3-Step Application

Application

Prepare the Surface

Make sure the surface to be treated is clean and dry. The product is ready to use; do not dilute.
Apply Evenly

Apply CONCRETE HYDRO evenly by brush, by spraying or with an airless spraying system. When applying with airless and other spraying equipment, use the personal protective equipment specified in the Safety Data Sheet.
Clean the Equipment

Clean the equipment with water after use.

Safe Use

Points to Consider

To use the product safely and at maximum efficiency, please read the following points carefully before application.

Due to the variety of materials, carry out a test on a small area before application to check for possible colour changes.
Do not allow the product to pool on the surface. Do not apply outdoors if rain is expected.
Do not apply to surfaces with condensation or in direct sunlight.
Avoid contact with newly polished marble and natural stone, glass, wood and metal surfaces.
It does not provide protection against the corrosive action of acids.
Application with airless systems or other spraying equipment is for professional use only; use the appropriate personal protective equipment specified in the Safety Data Sheet.
Sensitive to frost; keep out of the reach of children and do not release into the environment after use.
Storage: 5-30 °C; surface during application: 10-30 °C.